Filter
Top Products
System Management: Vendor Commands
KAT4000 User’s Manual 10007175-02
9-14
Get Serial Interface Properties Command
The Get Serial Interface Properties command is used to get the properties of a particular
serial interface.
Table 9-8: Get Serial Interface Properties Command
7 Bits [4:7] Clock Bus 2 Events
These bits indicate pending Clock Bus 2 requests arrived from
the shelf manager:
0 Clock Bus 2 Query
1 Clock Bus 2 Release
2 Clock Bus 2 Force
3 Clock Bus 2 Free
Bits [0:3] Clock Bus 1 Events
These bits indicate pending Clock Bus 1 requests arrived from
the shelf manager:
0 Clock Bus 1 Query
1 Clock Bus 1 Release
2 Clock Bus 1 Force
3 Clock Bus 1 Free
Response Data
(continued)
8 Bits [4:7] Reserved
Bits [0:3] Clock Bus 3 Events
These bits indicate pending Clock Bus 3 requests arrived from
the shelf manager:
0 Clock Bus 3 Query
1 Clock Bus 3 Release
2 Clock Bus 3 Force
3 Clock Bus 3 Free
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4Interface ID
0Serial Debug Interface
1 Payload Interface
Type: Byte: Data Field: (continued)