Filter
Top Products
Monitor: EEPROM/I2C Commands
10007175-02 KAT4000 User’s Manual
14-17
icrc32
The icrc32 computes a CRC32 checksum.
Definition:
icrc32 chip address[.0, .1, .2] count
iloop
The iloop command reads in an infinite loop on the specified address range.
Definition:
iloop chip address[.0, .1, .2] [# of objects]
imd
The imd command displays the primary I
2
C bus memory. For example:
imd 53 1800.2 100
displays 100 bytes from offset 0x1800 of I
2
C device 0x53 (right-shifted 7-bit address). The
.2 at the end of the offset is the length, in bytes, of the offset information sent to the
device. The serial EEPROMs all have two-byte offset lengths. The Real-Time Clock (RTC) has
a one-byte offset length. The temperature sensors have zero-byte offset lengths.
Definition:
imd chip address[.0, .1, .2] [# of objects]
imd2
The imd2 command displays the secondary I
2
C bus memory. For example:
imd 53 1800.2 100
displays 100 bytes from offset 0x1800 of I
2
C device 0x53 (right-shifted 7-bit address). The
.2 at the end of the offset is the length, in bytes, of the offset information sent to the
device. The serial EEPROMs all have two-byte offset lengths. The RTC has a one-byte offset
length. The temperature sensors have zero-byte offset lengths.
Definition:
imd2 chip address[.0, .1, .2] [# of objects]
imm
The imm command modifies the primary I
2
C memory and automatically increments the
address.
Definition:
imm chip address[.0, .1, .2]
imm2
The imm2 command modifies the secondary I
2
C memory and automatically increments
the address.
Definition:
imm2 chip address[.0, .1, .2]