Filter
Top Products
Page 6
Epson Research and Development
Vancouver Design Center
S1D13505 13505CFG Configuration Program
X23A-B-001-04 Issue Date: 01/03/29
Installation
Create a directory for 13505cfg.exe and the S1D13505 utilities. Copy the files
13505cfg.exe and panels.def to that directory. Panels.def contains configuration infor-
mation for a number of panels and must reside in the same directory as 13505cfg.exe.
Usage
13505CFG can be started from the Windows desktop or from a Windows command
prompt.
To start 13505CFG from the Windows desktop, double click the program icon or the link
icon if one was created during installation.
To start 13505CFG from a Windows command prompt, change to the directory
13505cfg.exe was installed to and type the command 13505cfg.
The basic procedure for using 13505CFG is:
1. Start 13505CFG as described above.
2. Open an existing file to serve as a starting reference point (this step is optional).
3. Modify the configuration. For specific information on editing the configuration, see
“13505CFG Configuration Tabs” on page 7.
4. Save the new configuration. The configuration information can be saved in two ways;
as an ASCII text file or by modifying the executable image on disk.
Several ASCII text file formats are supported. Most are formatted C header files used
to build display drivers or standalone applications.
Utility files based on the Hardware Abstraction Layer (HAL) can be modified directly
by 13505CFG.