Filter
Top Products
Epson Research and Development
Page 3
Vancouver Design Center
13505PWR Software Suspend Power Sequencing Utility S1D13505
Issue Date: 01/02/02 X23A-B-007-03
13505PWR
13505PWR is a diagnostic utility used to test some of the power save capabilities of the S1D13505.
13505PWR enables or disables the software suspend mode, hardware suspend mode, and the LCD,
allowing testing of the power sequencing in each mode.
To measure the timing for power sequencing, GPIO pin 1 is used to trigger an oscilloscope at the
point the requested power sequencing function is activated/deactivated. For further information on
LCD Power Sequencing and Power Save Modes, refer to the S1D13505 Programming Notes and
Examples, document number X23A-G-003-xx, and the S1D13505 Functional Hardware Specifi-
cation, document number X23A-A-01-xx.
The 13505PWR software suspend power sequencing utility must be configured and/or compiled to
work with your hardware platform. The program 13505CFG.EXE can be used to configure
13505PWR. Consult the 13505CFG users guide, document number X23A-B-001-xx, for more
information on configuring S1D13505 utilities.
This software is designed to work in both embedded and personal computer (PC) environments. For
the embedded environment, it is assumed that the system has a means of downloading software from
the PC to the target platform. Typically this is done by serial communications, where the PC uses a
terminal program to send control commands and information to the target processor. Alternatively,
the PC can program an EPROM, which is then placed in the target platform. Some target platforms
can also communicate with the PC via a parallel port connection, or an Ethernet connection.
S1D13505 Supported Evaluation Platforms
13505PWR supports the following S1D13505 evaluation platforms:
• PC system with an Intel 80x86 processor.
• M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332
processor.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
M68EC000 processor.
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
Installation
PC platform
: copy the file 13505PWR.EXE to a directory that is in the DOS path on your hard
drive.
Embedded platform
: download the program 13505PWR to the system.