Filter
Top Products
Page 8
Epson Research and Development
Vancouver Design Center
S1D13505 Windows® CE 3.x Display Drivers
X23A-E-006-01 Issue Date: 01/05/17
ddi.dll $(_FLATRELEASEDIR)\ddi_flat.dll NK SH
ENDIF
ENDIF
ENDIF
ENDIF
ENDIF
ENDIF ;
Insert this line
ENDIF
8. Modify MODE0.H.
The file MODE0.H (located in x:\wince300\platform\cepc\drivers\display\S1D13505)
contains the register values required to set the screen resolution, color depth (bpp),
display type, active display (LCD/CRT/TV), display rotation, etc.
Before building the display driver, refer to the descriptions in the file MODE0.H for
the default settings of the display driver. If the default does not match the configura-
tion you are building for then MODE0.H will have to be regenerated with the correct
information.
Use the program 13505CFG to generate the header file. For information on how to use
13505CFG, refer to the 13505CFG Configuration Program User Manual, document
number X23A-B-001-xx, available at www.erd.epson.com
After selecting the desired configuration, export the file as a “C Header File for
S1D13505 WinCE Drivers”. Save the new configuration as MODE0.H in the
\wince300\platform\cepc\drivers\display, replacing the original configuration file.
9. Edit the file PLATFORM.REG to match the screen resolution, color depth, and rota-
tion information in MODE.H. PLATFORM.REG is located in x:\wince300\plat-
form\cepc\files.
For example, the display driver section of PLATFORM.REG should be as follows
when using a 640x480 LCD panel with a color depth of 8 bpp and a SwivelView
mode of 0° (landscape):
; Default for EPSON Display Driver
; 640x480 at 8 bits/pixel, LCD display, no rotation
; Useful Hex Values
; 1024=0x400, 768=0x300 640=0x280 480=0x1E0 320=140 240=0xF0
[HKEY_LOCAL_MACHINE\Drivers\Display\S1D13505]
“Width”=dword:280
“Height”=dword:1E0
“Bpp”=dword:8
“ActiveDisp”=dword:1
“Rotation”=dword:0