Filter
Top Products
Epson Research and Development
Page 1
Vancouver Design Center
13505BMP Demonstration Program S1D13505
Issue Date: 01/02/02 X23A-B-006-04
13505BMP
13505BMP is a demonstration utility used to show the S1D13505 display capabilities by rendering
bitmap images on the display. The program will display any bitmap in Windows BMP file format
and then exit. 13505BMP also loads images to demonstrate the hardware cursor and ink layer.
13505BMP is designed to operate on a personal computer (PC) in the DOS environment only. Other
embedded platforms are not supported due to the possible lack of system memory or structured file
system.
The 13505BMP demonstration utility must be configured and/or compiled to work with your
hardware configuration. The program 13505CFG.EXE can be used to configure 13505BMP.
Consult the 13505CFG users guide, document number X23A-B-001-xx, for more information on
configuring S1D13505 utilities.
S1D13505 Supported Evaluation Platforms
13505BMP supports the following S1D13505 evaluation platforms:
• PC system with an Intel 80x86 processor.
Note
The 13505BMP source code may be modified by the OEM to support other evaluation platforms.
Installation
Copy the file 13505BMP.EXE to a directory that is in the DOS path on your hard drive.
Usage
At the prompt, type
13505bmp bmpfile [t=reg | cursor | ink] [x=n y=n]
[/buffer] [/crt] [/lcd] [/mouse] [/noclear] [/noinit] [/p] [/v]
[/?]
.
Where:
bmpfile
filename of a windows format bmp image
t=??
reg: regular display image
cursor: hardware cursor image
ink: ink layer image
x=n
n = starting cursor x position (default position = 0)
y=n
n = starting cursor y position (default position = 0)
/buffer
enable double buffering (image not displayed until completely loaded
in memory)
/crt
displays the image on a CRT
/lcd
displays the image on an LCD panel