Polycom 1500 Server User Manual


  Open as PDF
of 1124
 
Appendix I-Polycom Open Collaboration Network (POCN)
Polycom, Inc. I-15
Content
Polycom and Cisco endpoints can share Content within a Cisco TelePresence environment. The
content sharing experience depends on whether the endpoints are registered with the DMA
or CUCM.
H.239
A variety of resolutions and frame rates are supported.
For more information see "H.239 / People+Content” on page 4-1.
Can be used with SIP and H.323 endpoints, desktop (CMAD), room systems (HDX)
and ITP (OTX, RPX).
Not supported by Lync clients, IBM clients and Cisco CTS endpoints.
Cannot be used when HDX endpoints are registered to CUCM.
TIP
The resolution is fixed at XGA at 5fps.
Supported on HDX, Polycom ITP and Cisco CTS systems.
The following content compatibility options are available:
Tip not enabledCTS cannot join the conference, all other endpoints can share
H.239 content.
TIP video compatibilityCTS receives people video, all other endpoints can share
H.239 content.
TIP video and content compatibility CTS and HDX can share TIP content, all
other endpoints receive only the people video.
For more information see "Procedure 4: Configuring a TIP Enabled Profile on the
Collaboration Server” on page I-21.
Cisco Equipment
To configure the various Cisco entities the following procedures are required.
CUCM
1 Configure the CUCM to send and receive calls from the H.323 network.
Table I-4 Endpoint Registration Options - Content Sharing Experience
Multipoint Calls on
Collaboration Server
Content
Sharing
People + Content
Endpoints Registered to DMA
HDX/ITP to HDX/ITP Yes Yes
HDX/ITP to Cisco CTS Yes No
Cisco CTS to HDX/ITP Yes Yes
Endpoints Registered to CUCM
HDX/ITP to HDX/ITP Yes No
HDX/ITP to Cisco CTS Yes No,
Cisco CTS to HDX/ITP No No