Filter
Top Products
Chapter 16-Network Services
Polycom, Inc. 16-23
Port Enter the number of the TCP or UDP port used for listening. The port
number must match the port number configured in the SIP server.
Default port is 5060.
Outbound Proxy Servers: Primary / Alternate Server Parameter
Server IP Address By default, the Outbound Proxy Server is the same as the SIP Server.
If they differ, modify the IP address of the Outbound Proxy and the
listening port number (if required).
Note: When in IPv4&IPv6 or in IPv6 mode, it is easier to use Names
instead of IP Addresses.
Port Enter the port number the outbound proxy is listening to.
The default port is 5060.
Revocation Method
Global Responder
URL
For a detailed description of these fields see the Ultra Secure Mode
chapter, "Certificate Management” on page 23-5 and "Certificate
Revocation” on page 23-15.
Use Responder
Specified in
Certificate
Allow Incomplete
Revocation Checks
Skip Certificate
Validation for OSCP
Responder
Table 16-10 Default IP Network Service – SIP Servers (Continued)
Field Description
When updating the parameters of the SIP Server in the IP Network Service - SIP Servers dialog box,
the Collaboration Server must be reset to implement the change.