Filter
Top Products
Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
2-40 Polycom, Inc.
Telepresence Mode
(CP only)
Select the Telepresence Mode from the drop-down menu:
• Off - Normal conference video is sent by the Collaboration Server.
• Auto (Default) - If any ITP (Immersive Telepresence) endpoints
are detected, ITP features are applied to the conference video for
all participants.
When Auto is selected, the ITP features are dynamic. If all ITP
endpoints disconnect from the conference, normal conference
video is resumed for all participants. ITP features are resumed for
all participants should an ITP endpoint re-connects to the
conference.
• On - ITP features are applied to the conference video for all
participants regardless of whether there are ITP endpoints
connected or not.
Notes:
• This field is enabled only if the Collaboration Server system is
licensed for Telepresence Mode.
• Telepresence Mode is unavailable in Video Switching conferences.
Telepresence Layout
Mode
(CP only)
The Telepresence Layout Mode drop-down menu enables VNOC
operators and Polycom Multi Layout Applications to retrieve
Telepresence Layout Mode information from the Collaboration Server.
The following modes can be selected:
• Manual
• Continuous presence - Room Continuous Presence (Default)
• Room Switch - Voice Activated Room Switching
Note: This field is enabled only if the Collaboration Serversystem is
licensed for Telepresence Mode.
Table 2-16 New AVC CP Profile - Video Settings Parameters (Continued)
Field/Option Description
Table 2-17 Auto Layout – Default Layouts in CP Conferences
Number of Video Participants Auto Layout Default Settings
0–2
3
4–5