Polycom 1500 Server User Manual


  Open as PDF
of 1124
 
RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
21-8 Polycom, Inc.
Only and video connection type in advance. This mode is available only in MPM+ and
MPMx Card Configuration Modes.
In Fixed Resource Capacity mode, the maximum number of resources is based on the
system license and the hardware configuration of the RMX. By default, these resources
are allocated as HD720p30 resources, the first time Fixed Resource Capacity mode is
activated.
Example: If two MPM+ cards are installed in the MCU, providing 160 video resources,
and the license was not upgraded accordingly, although the system capacity is higher,
resource availability for allocation does not change and remains according to the license
(80). Conversely, if two MPM+ cards are installed in the MCU, providing 160 video
resources, and the license is for 160 video resources, and one of the MPM+ cards is
removed, the resource availability for allocation is changed to 80.
Resource Usage
SVC Conferencing
During a SVC conference, each SVC-endpoint uses one video port. One SVC resource is
equivalent to one AVC CIF resource. When sharing content an additional video resource is
used.
AVC Conferencing - Continuous Presence
Video resources usage varies according to the video resolution used by the endpoints. The
higher the video resolution (quality), the greater the amount of video resources consumed
by the MCU. Table 21-7 shows the number of video resources used for each resolution.
From Version 8.1, Fixed Resource Capacity Mode is not supported. Only the Flexible Resource
Capacity Mode is supported.
Table 21-6 HD Video Resource Usage vs. Resolution
Resolution/fps HD Video Resources Used
H.261 CIF 30fps 2/3
H.263 CIF 30fps 1/3
H.263 4CIF 30fps 1/3
H.264 CIF 30fps 1/3
H.264 CIF 60fps 1/3
H.264 4CIF 30fps 1/3
H.264 4CIF 60fps 1/3
H.264 720p 30fps 1/3
H.264 720p 60fps 2/3
H.264 1080p 25/30fps 2/3
H.264 1080p 50/60fps 4/3