Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/2000/4000 - Administrator’s Guide
G-2 Polycom, Inc.
Configuring the Workstation
The following procedures show how to modify the workstation’s networking parameters
using the Windows New Connection Wizard.
For non-Windows operating systems an equivalent procedure must be performed by the
system administrator.
Before connecting directly, you must modify the IP Address, Subnet Mask and Default
Gateway settings of the workstation to be compatible with either the Collaboration Server’s
Default Management Network or Alternate Management Network.
To modify the workstation’s IP addresses:
1 On the Windows Start menu, select Settings > Network Connections.
2 In the Network Connections window, double-click the Local Area Connection that has
Connected status.
3 In the Local Area Connection Status dialog box, click the Properties button.
The Alternate Management Network is only available if Network Separation has not been performed.
For more information, see "Multiple Network Services” on page 16-53.