Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
22-42 Polycom, Inc.
4 Click OK to close the New Flag dialog box.
The new flag is added to the flags list.
5 Click OK to close the System Flags dialog box.
VSW_HD1080p_HP_THRES
HOLD_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for
HD1080p resolution for High Profile-enabled VSW
conferences.
Default: 1024
VSW_HD720p30_HP_THRE
SHOLD_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for
HD720p30 resolution for High Profile-enabled VSW
conferences.
Default: 512
VSW_HD720p50-
60_HP_THRESHOLD_BITR
ATE
Controls the Minimum Threshold Line Rate (kbps) for
HD720p50 and HD720p50 resolutions for High Profile-
enabled VSW conferences.
Default: 832
VSW_RATE_TOLERANCE_
PERECENT
Determines the percentage of bandwidth that can be
deducted from the required bandwidth to allow participants to
connect to the conference.
For example, a value of 20 will allow a participant to connect
to the conference if the allocated line rate is up to 20% lower
than the conference line rate (or between 80% to 100% of the
required bandwidth).
Range: 0 - 75
Default: 0
VSW_SD_HP_THRESHOLD
_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for SD
resolution for High Profile-enabled VSW conferences.
Default: 128
WRONG_NUMBER_DIAL_
RETRIES
The number of re-dial attempts for a wrong destination
number or a wrong destination number time-out.
Range: 0 - 5
Default: 3
A flag value of 0 means that no redials are attempted.
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server (RMX)” on page 21-77.