RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
23-48 Polycom, Inc.
a To Add IP addresses:
For each IP address to be added to the White List:
i) In the Add IP Address field enter an IP address to be added to the White List and
click the Add button.
If an invalid IP address is entered, an error message is displayed and the
administrator is prompted to enter a correct IP address.
If a duplicate IP address is entered, a message: Duplicate IP’s are not allowed in
WhiteList is displayed.
ii) When all the IP addresses have been added, click OK.
A message is displayed: Applying white list will limit RMX web access to the
configured IP list, are you sure you want to continue?
iii) Click Yes to apply the modified White List.
b To Remove IP addresses:
For each IP address to be removed from the White List:
i) In the White List, click to select an IP address to be removed from the White
List.
ii) Click the Remove button.
ii) When all the IP necessary addresses have been removed, click OK.
A message is displayed: Applying white list will limit RMX web access to the
configured IP list, are you sure you want to continue?
iii) Click Yes to apply the modified White List.
Alternative Network Address Types (ANAT)
In compliance with UC_APL_NET_0007 Alternative Network Address Types (ANAT) is
supported.
When the RMX is configured for IPv4 and IPv6 Addressing, the addition of the sdp-anat option
tag in the SIP Require and SIP Supported headers allows a mixture of IPv4 and IPv6 addressing
to be specified by the Session Description Protocol (SDP).
For a full description of ANAT see IETF RFCs 4091 and 4092.
Guidelines
• BFCP over TCP is not supported in Ultra Secure Mode. It’s associated Content channel is
not available.
• BFCP over UDP is supported in Ultra Secure Mode.
• If the RMX is configured for both IPv4 and IPv6, IPv4 addressing is given preference
when establishing the connection.
• If an Outbound Proxy is configured, its transport type is used.
•If an Outbound Proxy is not configured, the SIP Server’s (Registrar) transport type is used.
The Outbound Proxy and the SIP Server must be configured with one type only either
according to the IP address type or according to the DNS Resolution type. However, if
the RMX is configured for IPv4&IPv6 then the SIP Contact field will contain both IPv4
and IPv6 addresses.