Filter
Top Products
Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
H-6 Polycom, Inc.
For example, if company B wants to set up federation with company A and receive and send
SIP calls that will be handled by the Polycom SIP signaling domain in company A, you need
to add the FQDN of the company A Office Communications Server domain as well as the
SIP signaling domain of company A to the list of internal SIP Server domains supported by
the company B Office Communications Server/Lync Server environment.
For more information, see the Microsoft documentation and the Polycom® Unified
Communications Deployment Guide for Microsoft® Environments.
Integrating the Collaboration Server into the Microsoft
Office Communications Server Environment
When the Collaboration Server is integrated into the Office Communications Server
environment, calls to conferences running on the Collaboration Server can be routed using
Matched URI dialing and/or Numerical dialing.
Both routing methods (numerical dialing and Matched URI dialing) can be enabled
simultaneously in the Office Communications Server and the Collaboration Server system
or you can enable one of these methods, depending on your environment requirements.
In both methods, the Collaboration Server configuration is the same.
Setting the Matched URI Dialing Method
To enable the Matched URI dialing method the following tasks have to be completed:
Office Communications Server side:
1 Set the Static Route & Trusted Host for Collaboration Server in the Office
Communications Server.
2 Optional if Load Balancer Server is present. Set the Static Route & Trusted Host for
Collaboration Server in the Load Balancer server.
Collaboration Server side:
The following tasks are detailed in "Configuring the Collaboration Server for Microsoft
Integration” on page H-37.
3 Modify the Management Network Service to include the DNS server and set the
Transport Type to TLS.
4 Create the security certificate (using one of the two available methods)
5 Define a SIP Network Service in the Collaboration Server and install the TLS certificate.
6 Modify and add the required system flags in the Collaboration Server System
Configuration.
7 Optional. Defining additional Entry Queues and Meeting Rooms in the Collaboration
Server environment. For more information see "Defining a New Entry Queue” on
page 7-3 and "Creating a New Meeting Room” on page 6-5.
From Version 7.0.x, Microsoft R1 is not supported with Collaboration Server systems.