Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
16-48 Polycom, Inc.
6 Click Next.
The Span Definition dialog box is displayed:
Dial-out Prefix Enter the prefix that the PBX requires to dial out. Leave this field
blank if a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric value between 0
and 9999.
Default: Blank
Table 16-25 PRI Settings (Continued)
Field Description
Table 16-26 Span Definition
Field Description
Framing Select the Framing format used by the carrier for the network
interface from the list.
• For T1 spans, default is SFSF.
• For E1 spans, default is FEBE.
Side Select one of the following options:
• User side (default)
• Network side
• Symmetric side
Note: If the PBX is configured on the network side, then the
Collaboration Server unit must be configured as the user side, and
vice versa, or both must be configured symmetrically.