Appendix I-Polycom Open Collaboration Network (POCN)
Polycom, Inc. I-45
Endpoints
6 Configure HDX endpoints to register to Lync Server.
The procedures for configuring HDX endpoints are described in detail in the
Polycom Unified Communications Deployment Guide for Microsoft Environments.
7 Configure H.323 endpoints to register to DMA as SIP Proxy
The procedures for configuring SIP endpoints are described in detail in the Polycom
Unified Communications Deployment Guide for Cisco Environments.
8 Configure SIP endpoints to register to:
• DMA as SIP Proxy
• Lync Server as SIP Proxy
• CUCM as SIP Proxy
The procedures for configuring SIP endpoints are described in detail in the Polycom
Unified Communications Deployment Guide for Cisco Environments.
9 Configure TIP endpoints to register to:
•DMA
•CUCM
The procedures for configuring TIP- enabled endpoints are described in detail in the
Polycom Unified Communications Deployment Guide for Cisco Environments.
Content
Endpoint Registration and Dialing Method affect the Video and Content Sharing characteristics
of the conference as detailed in Table I-8.
Table I-8 Video and Content
Dialing Method
Endpoint Registration
Lync CUCM DMA
ITP /HDX
RTV Key is required for
HDX and ITP
ITP /HDX
TIP Key is required for HDX
ITP /HDX
TIP Key is required for HDX
HDX to
Collaboration
Server
• HD H.264 Video
• SIP P+C
• Content: XGA,5fps
• ICE
• HD H.264 Video
• No Content
• ICE not supported
• HD H.264 Video
• SIP P+C
• Content: XGA,5fps
• ICE not supported
Lync to
Collaboration
Server
• HD Video (RTV)
• No Content Sharing
• Content sent to Lync using Content for Legacy Endpoints
(Not supported in ITP Mode)
CTS to
Collaboration
Server
• HD1080p30
• TIP Content Sharing
• Content: XGA,5fps