Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
16-2 Polycom, Inc.
When IPv4 is selected, IPv6 fields are not displayed and conversely when IPv6 is selected,
IPv4 fields are not displayed. When IPv6 & IPv4 is selected both IPv6 and IPv4 fields are
displayed.
For the purposes of comprehensive documentation, all screen captures in this chapter show
the dialog boxes as displayed with IPv6 & IPv4 selected.
For more information see "Using IPv6 Networking Addresses for Collaboration Server Internal
and External Entities” on page 16-36.
Alternative Network Address Types (ANAT)
When the RMX is configured for IPv4 and IPv6 Addressing, the addition of the sdp-anat option
tag in the SIP Require and SIP Supported headers allows a mixture of IPv4 and IPv6 addressing
to be specified by the Session Description Protocol (SDP).
For more information see "Alternative Network Address Types (ANAT)” on page 23-48.
Management Network (Primary)
The Management Network is used to control the Collaboration Server, mainly via the RP
Collaboration Server Web Client application. The Management Network contains the network
parameters, such as the IP address of the Control Unit, needed for connection between the
Collaboration Server and the RP Collaboration Server Web Client. This IP address can be used
by the administrator or service personnel to connect to the Control Unit should the MCU
become corrupted or inaccessible.
During First Time Power-up, the Management Network parameters can be set either via a USB
key or by using a cable to create a private network.
For more information, see thePolycom RealPresence Collaboration Server (RMX) 1500/2000/4000
Getting Started Guide, "Procedure 1: First-time Power-up” on page 2-27 and Appendix G,
“Configuring Direct Connections to the Collaboration Server”on page G-1.
Default IP Service (Conferencing Service)
The Default IP Service (Conferencing Service) is used to configure and manage
communications between the Collaboration Server and conferencing devices such as
endpoints, gatekeepers, SIP servers, etc.
The Default IP Service contains parameters for:
• Signaling Host IP Address
• MPM, MPM+ and MPMx media cards (Media Processors
• External conferencing devices
Calls from all external IP entities are made to the Signaling Host, which initiates call set-up
and assigns the call to the appropriate MPM / MPM+ / MPMx media card.
Conferencing related definitions such as environment (H.323 or SIP) are also defined in this
service.
Most of the Default IP Service is configured by the Fast Configuration Wizard, which runs
automatically should the following occur:
From Version 7.1, MPM media cards are not supported.
From Version 8.1, MPM+ media cards are not supported.