Filter
Top Products
Chapter 16-Network Services
Polycom, Inc. 16-51
16 Attach spans to existing Network Services, by marking the appropriate check boxes in
the Attached field.
Each ISDN/PSTN card can support 7 E1 or 9 T1 PRI lines.
17 Click Save & Close.
Modifying an ISDN/PSTN Network Service
To Modify an ISDN/PSTN Network Service:
1 In the RMX Management pane, click the ISDN/PSTN Network Services ( ) icon.
2 In the ISDN/PSTN Network Services list, double-click the ISDN or right-click the ISDN
entry and select Properties.
The ISDN Properties dialog boxes are displayed. They are similar to the Fast
Configuration Wizard’s dialog boxes. For more information see "To Add an ISDN/PSTN
Network Service:” on page 16-45.
The following ISDN Properties can be modified:
— PRI Settings
• Net Specific
• Dial-out Prefix
— Span Definition
• Framing
• Side
• Line Coding
• Switch Type
— Phones
• Dial-in Phone Numbers
• MCU CLI