Filter
Top Products
Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
8-10 Polycom, Inc.
IP Address
(H.323 and SIP Only)
Enter the IP address of the participant’s endpoint.
• For H.323 participant define either the endpoint IP address or
alias.
• For SIP participant define either the endpoint IP address or the
SIP address.
For Collaboration Servers registered to a gatekeeper, the
Collaboration Server can be configured to dial and receive calls to
and from H.323 endpoints using the IP address in the event that the
Gatekeeper is not functioning. For more information, see "Gateway
Calls” on page 19-1.
Note: This field is hidden when the ISDN/PSTN protocol is selected.
Phone Number
(ISDN/PSTN Only)
Enter the phone number of the ISDN/PSTN participant.
Note: This field is only displayed when the ISDN/PSTN protocol is
selected.
Alias Name/Type
(H.323 Only)
If you are using the endpoint’s alias and not the IP address, first
select the type of alias and then enter the endpoint’s alias:
• H.323 ID (alphanumeric ID)
• E.164 (digits 0-9, * and #)
• Email ID (email address format,
e.g. abc@example.com)
• Participant Number (digits 0-9, * and #)
Notes:
• Although all types are supported, the type of alias is dependent on
the gatekeeper’s capabilities. The most commonly supported alias
types are H.323 ID and E.164.
• This field is used to enter the Entry Queue ID, target Conference
ID and Conference Password when defining a cascaded link.
• Use of the E.164 Number is dependent on the setting of the
REMOVE_IP_IF_NUMBER_EXISTS System Flag. For more
information see "Substituting E.164 Number in Dial String” on
page 8-14.
• This field is removed from the dialog box when the ISDN/PSTN
protocol is selected.
Table 8-3 New Participant – General Properties (Continued)
Field Description