Filter
Top Products
Chapter 19-Gateway Calls
Polycom, Inc. 19-19
3 Define the following parameters:
Table 19-6 New Gateway Profile Properties
Option Description
Display Name Enter a unique-per-MCU name for the Gateway Profile in native
language character sets to be displayed in the RP Collaboration
Server Web Client.
The system automatically generates an ASCII name for the Display
Name field that can be modified using Unicode encoding.
•
English text uses ASCII encoding and can contain the most
characters (
Maximum length in ASCII is 80 characters
).
• European and Latin text length is approximately half the length of
the maximum.
• Asian text length is approximately one third of the length of the
maximum.
The maximum length also varies according to the mixture of Unicode
and ASCII.
Routing Name The Routing Name is defined by the user, however if no Routing
Name is entered, the system will automatically assign a new name
when the Profile is saved as follows:
• If an all ASCII text is entered in Display Name, it is used also as
the Routing Name.
• If any combination of Unicode and ASCII text (or full Unicode text)
is entered in Display Name, the ID (such as Conference ID) is
used as the Routing Name.
Conference Profile The default Conference Profile is selected by default. If required,
select the appropriate Profile from the list of Profiles defined in the
MCU.
Note: In the Conference Profile - Advance dialog box, the Auto
Terminate option enables you to automatically terminate the
Gateway Session when one participant remains connected (excluding
the Recording Link).
A new Gateway Session is created using the parameters defined in
the Profile.
ID Enter a unique number identifying this conferencing entity for dial in.
Default string length is 4 digits.
If you do not manually assign the ID, the MCU assigns one after the
completion of the definition. The ID String Length is defined by the
flag NUMERIC_CONF_ID_LEN in the System Configuration.
Gateway Dial out
Protocols
Select the communication protocols to be used for dialing out to the
destination participant(s).
The system starts by connecting the participant using the first
selected protocol. If the call is not answered or it cannot be completed
using one communication protocol, the system will try to connect the
endpoint using the next communication protocol in the following order:
H.323, SIP and ISDN. PSTN numbers are identified separately and
are dialed right away without trying other connections.
By default, all protocols (H.323, SIP, ISDN and PSTN) are selected.
Clear the protocol that should not be used for connecting the
destination endpoint.