Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
I-16 Polycom, Inc.
a With Neighbored IOS and CMA Gatekeepers
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, “Configuring Cisco Unified Communications Manager for H.323”.
b With CMA Gatekeeper
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, “Configuring Cisco Unified Communications Manager for H.323”.
c With IOS Gatekeeper
For more information see the Polycom Unified Communications Deployment Guide for
Cisco Environments, “Configuring Cisco Unified Communications Manager for H.323”.
IOS Gatekeeper
>> Set up zones and gateway type prefixes to enable dialing to DMA and Collaboration
Server systems.
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, “Configuring the Cisco IOS Gatekeeper “.
IOS and CMA Gatekeepers (Neighbored)
>> Configure the Cisco IOS Gatekeeper for two separate zones.
For more information see the Polycom Unified Communications Deployment Guide for Cisco
Environments, “Configure the Cisco IOS Gatekeeper for use with a CMA System”.
Polycom Equipment
The following table lists the Polycom products supported within the various Deployment
Architecture.
Only Collaboration Server configurations are described in detail in this document.
Configuration procedures for all other solution components are described in the Polycom
Unified Communications Deployment Guide for Cisco Environments.
Table I-5 Supported current Polycom products
Polycom TIP and SIP Version(s)
Polycom DMA 7000 system V4.0
Polycom RealPresence Collaboration Server
(RMX) 2000 and RealPresence Collaboration Server
(RMX) 4000 systems
V7.6 and higher
MPMx card is required.
Immersive Telepresence Systems:
• RPX 200 and 400 systems
• OTX 300 system
• TPX HD 306 system
• ATX HD 300 system
V3.0.3
Requires TIP option key.
Requires Polycom Touch Control.
HDX Systems:
• 7000 HD Rev C
• 8000 HD Rev B
• 9006
• 4500
V3.0.3
Requires TIP option key.