Filter
Top Products
Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
2-74 Polycom, Inc.
Guidelines
•The Overlay Layouts are supported:
— With MPMx cards only.
— In Collaboration Server CP Conferencing Mode only.
— With ITP, non-ITP and CTS endpoints used only as standard endpoints.
— With both new and classic Skins in Collaboration Server CP mode. For more
information see “Skins” on page 2-46.
• Overlay Layouts are not supported in ITP conferences as they are not supported by the
MLA application.
•The Overlay Layouts are 20% of the height of the endpoint display and are supported on
endpoints of both 16:9 and 4:3 aspect ratios.
• Overlay Layouts are recommended for use with high resolution endpoints.
• Overlay Layouts are not selected as defaults by the system. Default layouts are selected
as in previous versions and are described in detail in "Auto Layout – Default Layouts in
CP Conferences” on page 2-40.
• Message Overlay is not affected by the use of Overlay Layouts and is displayed as the top
level overlay.
• Vertical Position for Site Name display: Site Names are displayed for all cells. Because the
smaller cells are located at the bottom of the large cell, when enabling Site Names it is
advisable not to locate the Site Name at the bottom of the cells.
• Standalone Endpoint Cells are displayed each with a border. For all Overlay Layouts,
border color is dependent on the selected Skin.
For more information seePolycom RealPresence Collaboration Server (RMX) 1500/2000/
4000 Administrator’s Guide “Skins” on page 2-46.
• System behavior for Video Forcing and Personal Layout Control using the Overlay Layouts
during an ongoing conference is the same
as for other video layouts. For more
information see the Polycom RealPresence Collaboration
Server (RMX) 1500/2000/4000
Getting Started Guide:
— "Video Forcing (AVC-Based CP and Mixed CP and SVC Conferences)” on page 3-62
— "Personal Layout Control with the RMX Web Client” on page 3-68.
• Overlay Layouts are only available for selection for the Conference Layout and are not
available for selection for Personal Layout.
Single Overlay Cell: 2-4 Screens
These Overlay Layouts will only be available in ITP (Telepresence) conferences when support for
Overlay Layouts is included in the Polycom® Multipoint Layout (MLA) application.