Filter
Top Products
Chapter 16-Network Services
Polycom, Inc. 16-65
All the flags must be manually added to this dialog box. For a detailed description of
the flags and how to add them, see "Manually Adding and Deleting System Flags” on
page 22-19.
The following flags can be defined per service:
—
ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF
— ENABLE_H239
— SIP_ENABLE_FECC
— ENABLE_CLOSED_CAPTION
— ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF
— NUMERIC_CONF_ID_LEN
— NUMERIC_CONF_ID_MIN_LEN
— NUMERIC_CONF_ID_MAX_LEN
— ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_PASSWORD
— MAX_CP_RESOLUTION
— QOS_IP_AUDIO
— QOS_IP_VIDEO
— QOS_IP_SIGNALING
— ENABLE_CISCO_GK
— SIP_FREE_VIDEO_RESOURCES
— FORCE_CIF_PORT_ALLOCATION
— MS_ENVIRONMENT
— SIP_FAST_UPDATE_INTERVAL_ENV
— SIP_FAST_UPDATE_INTERVAL_EP
— H263_ANNEX_T
— H239_FORCE_CAPABILITIES
— MIX_LINK_ENVIRONMENT
— IP_LINK_ENVIRONMENT
— FORCE_STATIC_MB_ENCODING
— FORCE_RESOLUTION
— SEND_WIDE_RES_TO_IP
— DISABLE_WIDE_RES_TO_SIP_DIAL_OUT
— SEND_SIP_BUSY_UPONRESOURCE_THRESHOLD
5 Click the Routers tab.
6 Define the routers used in this network and that are other than the routers defined in
the Management Network. The field definitions of the Routers tab are the same as for
the Default Management Network. For more information see "Click the Routers tab.” on
page 16-14.
Flags defined per Network Service override their general definition in the System Configuration.