3Com 10014299 Network Router User Manual


 
6 CHAPTER 1: 3COM ROUTER INTRODUCTION
Figure 1 Schematic diagram of the 3Com Router architecture
Features of the 3Com
Router Version 1.10
The following table lists the basic features of the 3Com Router 1.x:
Table 3 List of the 3Com Router 1.x features
System
service
TCP/UDP
IP forwarding engine
Fast
forwarding
IP security
and firewall
QoS
assurance
Route policy
management
RIP OSPF BGP
FTP
HTTP
TELNET
VPN
PPP/SLIP
Configuration
management
Voice Service
......
Command
line
SNMP
Web
management
HDLC EthernetX.25Frame Relay
Attribute Description
Interconnection protocol LAN Supports Ethernet_II and Ethernet_SNAP frame structure
Follows IEEE 802.2 and IEEE 802.3 regulations
WAN Supports Frame Relay and Frame Relay switching
Supports FRoIP, FRoISDN
Supports Multi-link Frame Relay (MFR), FR compression
Supports FR Traffic Shaping (FRTS) to ensure even traffic over
the VCs on FR
Supports X.25 and X.25 switching, X.25 Over TCP (XOT)
Supports HDLC, SDLC and LAPB regulations
Supports SLIP, PPP and MP
Supports PPPoE Client
Supports ITU-T Q.921 and Q.931 regulations, ISDN (ITU-T
Q.921, Q.931) and ISDN semi-permanent connection
Supports bridging technology
Dial-up network Manages Modem through the AT command and configures
script to dial up.
Supports dial demand Routing (dialer profiles and legacy
BDR)
Supports Callback (PPP callback and ISDN Calling Line
Identification callback)
Provides ISDN leased line, automatic dialing, and cyclic dial
queue backup
Provides Dial interface backup
VPN Supports L2TP, implements VPDN (Supports DNIS user,
domain name user, and full name user)
Supports L3 channel protocol GRE