Filter
Top Products
Configure FTP 53
Table 29 Set the authentication mode of FTP server
2 Add FTP authorized user name and password
Input the following command in system view.
Table 30 Add FTP authorized user name and password
For a detailed introduction to the above command, please refer to the chapter
“AAA and RADIUS Configuration” in the Security section of this manual.
Start FTP Server
The FTP server can be started after configuring the authentication and
authorization of the FTP server. The FTP server supports multi-user access
simultaneously. The remote FTP user sends a request to the FTP server, which will
execute a corresponding action and return the execution result to the user.
Enter the following commands in system view.
Table 31 Start FTP server
Configure Parameters of FTP Service
Configure FTP service parameters according to system running status, so as to
make proper use of system resources.
1 Set the file name on FTP server
Before the file is uploaded or downloaded, the name of the
program/configuration file should be set on the router.
Please enter the following commands in system view.
Table 32 Set the file name on FTP server
Operation Command
Start AAA server aaa-enable
Disable AAA server undo aaa-enable
Turn on the accounting selection switch aaa accounting-scheme optional
Turn off the accounting selection switch undo aaa accounting-scheme
optional
Set local authentication for PPP connection aaa authentication-scheme login
default local
Operation Command
Add FTP authorized user name and
password
Local-user username service-type ftp
password {simple | cipher } password
Delete FTP user undo user username
Operation Command
Start FTP server ftp-server enable
Disable FTP server undo ftp-server
Operation Command
Set the program file name on FTP server ftp-server system-name file-name
Set the configuration file name on FTP server ftp-server config-name file-name