Filter
Top Products
76 CHAPTER 5: CONFIGURING NETWORK MANAGEMENT
Table 56 3Com Router-supported MIB
Configure SNMP SNMP configuration includes:
■ Configure the network management agent on a router
■ Configure the information of router administrator
■ Configure the SNMP version
■ Configure the trap
■ Adjust the maximum size of SNMP packets
1 Configure network management agent on a router
Perform the following configurations in system view.
Table 57 Configure network management agent on a router
By default, the system disables SNMP service.
Engine ID is the unique ID of individual routers on the overall network. It is a string
of 5 to 32 bytes in hexadecimal format. By default, the SNMP engine ID is
MIB attribute MIB description Reference
Public MIB MIB II based on TCP/IP network
equipment
RFC1213
RMON MIB RFC1757
RIP-2 MIB RFC1389
OSPF MIB RFC1253
BGP MIB RFC1657
PPP MIB RFC1471
X.25 MIB RFC1382
LAPB MIB RFC1381
PPP RFC1471, RFC1472, RFC1473,
RFC1661, RFC1332, and RFC1334
FrameRelay MIB RFC1315 and RFC2115
SNMP RFC1907, RFC2271, RFC2272,
RFC2273, RFC2273, RFC2274 and
RFC2275
Private MIB IP MIB
ICMP MIB
QoS MIB
NDEC MIB
DLSw MIB
MIB of terminal access servers
MIB of RMON extension alarms
3Com Router MIB
3Com Module MIB
Operation Command
Enable SNMP service snmp--agent
Disable SNMP service undo snmp-agent
Set an engine ID for the equipment snmp-agent local-engineid
engineid
Set the engine ID of equipment to the default
value
undo snmp-agent local-engineid