Filter
Top Products
CT3 Interface 153
Table 185 Disable and Enable CT3 interface
The enabling/disabling operation done on the CT3 interface takes effect on CT3
interface, the T1 channels and the serial interfaces formed through binding
operation. The enabling/disabling operation done on the T1 interface takes effect
on T1 interface and the serial interfaces formed through binding operation.
To disable/enable only the serial interface formed by T3, the serial interface formed
by T1 channel or the serial interface formed by timeslot bundle of T1 channel, user
can use command
shutdown/undo shutdown in Serial interface view.
Perform the following configuration in all views.
Table 186 Display and debug of the CT3 interface
Operation Command
Disable CT3 Interface shutdown
Enable CT3 Interface undo shutdown
Disable T1 channel t1 t1-number shutdown
Enable T1 channel undo t1 t1-number shutdown
Operation Command
Display the T3/CT3 Controller state and states of
all channels
display controller t3 [
interface-number ]
Display the configuration and state information
of the serial interface formed by the T3/CT3
interface
display interface serial
interface-number