Filter
Top Products
542 CHAPTER 38: CONFIGURING AAA AND RADIUS PROTOCOL
By default, the real-time accounting packet is sent to the RADIUS server at an
interval of 0 minutes, indicating that real-time accounting is disabled. The interval
ranges from 0 to 32767 minutes.
Displaying and
Debugging AAA and
RADIUS
Use the debugging and display commands in all modes.
Table 617 Display and debug AAA and RADIUS
AAA and RADIUS
Configuration
Examples
This section provides examples of using AAA and Radius within a network, with a
suggested procedure for each configuration
Accessing User
Authentication Case 1
The RADIUS server is used for authentication. 129.7.66.66 acts as the first
authentication and accounting server, and 129.7.66.67 as the second
authentication and accounting server, both using default authentication port
number 1812 and default accounting port number 1813.
Configure the time interval at which the
real-time accounting packet is sent to
RADIUS server
radius timer
realtime-accounting-scheme minutes
Restore default value of the time interval
at which the real-time accounting packet
is sent
undo radius timer
realtime-accounting
Operation Command
Display status of dial-in users display aaa user
View local user database display user
Enable RADIUS event debugging debugging radius event
Enable RADIUS packet debugging debugging radius packet
Enable RADIUS primitive language
debugging
debugging radius primitive