Filter
Top Products
Rlogin Terminal Service 67
■ Only supports IP address configuration. DNS is not supported.
■ The supported terminal type is VT100.
■ The supported baud rate is 9600 bps.
■ Supports remote access of user terminals connected with the asynchronous
serial port under the flow mode by asynchronous private line or modem dial-up
and supports the maintenance of terminals connected with Console port.
Remote access of the terminals connected with routers in other means (such as
through telnet) is not supported.
■ The function of activating multiple Rlogin sessions at the same user terminal is
not provided.
Configure Rlogin Please implement the following configuration in system view.
Table 50 Establish a Rlogin connection
Typical Rlogin
Configuration Examples
Use local user name abc to log on
[Router]rlogin 10.110.96.53 root
Trying 10.110.96.53 ...
Password:
Last successful login for root: Thu Jan 30 20:29:45 2003 on ttyp2
Last unsuccessful login for root: Sun Jan 26 11:21:53 2003
SCO OpenServer(TM) Release 5
(C) 1976-1998 The Santa Cruz Operation, Inc.
(C) 1980-1994 Microsoft Corporation
All rights reserved.
For complete copyright credits,
enter "copyrights" at the command prompt.
you have mail
TERM = (vt100)
Terminal type is vt100
# exit
rlogin: connection closed.
Use local user name abc and enter the wrong password for the first time
[Router] rlogin 1.1.254.78
Trying 1.1.254.78 ...
Password: ( enter Wrong password)
Login incorrect
Wait for login retry:
login: abc
Password: (enter correct password)
Last successful login for root: Thu Sep 06 15:14:15 2001 on ttyp0
Last unsuccessful login for root: Thu Sep 06 14:22:35 2001 on ttyp0
Operation Command
Establish a Rlogin connection rlogin ip-address [ username ]
Shut down a Rlogin connection exit