Filter
Top Products
628 CHAPTER 43: CONFIGURING L2TP
■ Click <Next> to complete the configuration.
■ Double click [Connect Connection to 660046] to start VPN connection. Before
that, if the dialup connection is not set up, the system will automatically
prompt you to set up dialup connection. After connection, input the username
and password that are the same as those configured at LNS side, as shown in
the following figure.
Figure 195 Connect Connection to 660046
■ After the VPN is established, execute ipconfig command in the CLI mode of
Windows2000, and then you can view the IP addresses assigned by LAC (NAS)
and LNS, as shown in the following figure.
Windows 2000 IP Configuration
Ethernet adapter
Media State. . . . . . . . . . . .:Cable Disconnected
PPP adapter
Connection-specific DNS Suffix . .:
IP Address. . . . . . . . . . . . .:192.168.0.3
Subnet Mask . . . . . . . . . . . .:255.255.255.255
Default Gateway . . . . . . . . . .:192.168.0.3
PPP adapter:
Connection-specific DNS Suffix. . .:
IP Address. . . . . . . . . . . . .:192.170.0.3
Subnet Mask . . . . . . . . . . . .:255.255.255.255
Default Gateway . . . . . . . . . .:192.170.0.3
An Individual User
Interconnects
Headquarters via the
Router
I. Networking requirements
A user wants to communicate with the headquarters, but the headquarters adopts
a private address (e.g., 192.168.0.0), so the user cannot visit the internal server