Filter
Top Products
L2TP Configuration Examples 619
d Configure the IP address of Serial0 interface of LNS.
[Router-LNS] interface serial 0
[Router-LNS-Serial0] ip address 192.167.0.1 255.255.255.0
e Configure the Virtual-Template-related information.
[Router-LNS] interface virtual-template 1
[Router-LNS-Virtual-Template1] ip address 192.168.0.1 255.255.255.0
[Router-LNS-Virtual-Template1] ppp authentication-mode chap
[Router-LNS-Virtual-Template1] remote address pool 1
f Enable L2TP service and configure a L2TP group.
[Router-LNS] l2tp enable
[Router-LNS] l2tp-group 1
[Router-LNS-l2tp1] tunnel name lns-end
[Router-LNS-l2tp1] allow l2tp virtual-template 1 remote lac-end
g Enable tunnel authentication and configure a tunnel authentication password.
[Router-LNS-l2tp1] tunnel authentication
[Router-LNS-l2tp1] tunnel password simple 3Com router
3 Configuration at the user side
■ Open [Start/Program/Accessories/Communication/Network Connection
Wizard] on the PC installed with Windows2000 operation system. Double click
[New Connection] and choose “Dial-up to the Internet”.
Figure 184 Network Connection Wizard
■ Click <Next> and choose “I want to set up my Internet connection manually, or
I want to connect through a local area network (LAN)” in the popup dialog
box, as shown in the following figure.