Filter
Top Products
306 CHAPTER 19: CONFIGURING BRIDGE
Table 343 Map the bridge address to DLCI
11 Configure Bridging over BDR
Perform the following configuration in system view.
a Define a dialer list
Table 344 Define a dialer list
b Configure the bridge interface
Perform the following configuration in interface view.
Table 345 Configuration on the interface
12 Configure Bridging over LAPB
Perform the following configuration in interface view.
Table 346 Configure the link layer protocol of the interface to LAPB
13 Configure Bridging over PPP
Perform the following configuration in interface view.
Table 347 Configure the link layer protocol of the interface to PPP
14 Configure Bridging over HDLC
Perform the following configuration in interface view.
Table 348 Configure the link layer protocol of the interface to HDLC
15 Configure Bridging over VLAN
Perform the following configuration in interface view.
Operation Command
Configure a Frame Relay mapping forwarded to the
bridge
fr map bridge dlci broadcast
Operation Command
Define a dialer list. dialer-rule dialer-group
bridge { permit | deny }
Operation Command
Add the interface to the dialer-group dialer-group dialer-group
Map the bridge address to BDR dialer route bridge broadcast
string
Operation Command
Configure the link layer protocol of the
interface to LAPB
link-protocol lapb [ dte | dce ]
[ multi-protocol ]
Operation Command
Configure the link layer protocol of the interface
to PPP
link-protocol ppp
Operation Command
Configure the link layer protocol of the interface
to HDLC
link-protocol hdlc