Filter
Top Products
28 CHAPTER 2: 3COM ROUTER USER INTERFACE
By default, the system clock is 08:00:00 1 1 1997.
The system clock will reset to the initial number when the configuration is deleted
by using the delete command or is deleted at the boot menu.
3 Reboot the system
Please perform the following commands in all views.
Table 13 Reboot the system
Before rebooting the system, make sure to save the current configuration by using
the save command, or some configuration may lost.
Display the System
Information of the
Router
Execute the following commands in all views.
Table 14 Display the information of the Router
Operation Command
Reboot the system right now reboot [ reason reason-string ]
Reboot the system after a specified time reboot mode interval { hh:mm | time }
[string ]
Reboot the system at the specified time reboot mode time hh:mm [ dd/mm/yy ]
[string ]
Cancel the reboot task reboot cancel
Operation Command
Displays the current date and clock of the
router
display clock
Displays the duration between the startup of
the Router and the execution of the command
display duration
Displays the router name display systname
Displays the use information of the CPU display processes cpu
Displays the use information of the router
memory
display processes memory { all |
blksize size } [ detail ]
Displays the basic information of the Router display base-information [ page ]
Displays the software version information of
the Router
display version