Filter
Top Products
392 CHAPTER 25: CONFIGURING DLSW
Table 448 Configure retransmission number of LLC2
By default, the retransmission number of LLC2 is 20.
f Configure LLC2 Local Acknowledgement Time
LLC2 local acknowledgement time refers to max wait time for waiting for the
other part's acknowledgement after sending a piece of LLC2 data message.
Please process the following configurations in the Ethernet interface view.
Table 449 Configure LLC2 local acknowledgement time
By default, LLC2 local acknowledgement time is 200 ms.
g Configure BUSY Status Time of LLC2
When it queries the station, LLC2 will wait for the next query if the station is
busy.
The interval of re-querying LLC2 Busy station.
Please process the following configurations in the Ethernet interface view.
Table 450 Configure BUSY status time of LLC2
By default, BUSY status time of LLC2 is 300 ms.
h Configure P/F Wait Time of LLC2
P/F wait time of LLC2 refers to duration waiting for correct information frame
after sending frame P.
Please process the following configurations in the Ethernet interface view.
Table 451 Configure P/F wait time of LLC2
By default, P/F wait time of LLC2 is 5000 ms.
i Configure REJ Status Time of LLC2
REJ status time of LLC2 refers to duration waiting for correct information frame
after refusing frame.
Please process the following configurations in the Ethernet interface view.
Operation Command
Configure retransmission number of LLC2 llc2 max-transmission
retries
Restore the default value of the retransmission number of
LLC2
undo llc2
max-transmission
Operation Command
Configure LLC2 Local Acknowledgement Time llc2 timer ack mseconds
Restore the default value of LLC2 local acknowledgement
time
undo llc2 timer ack
Operation Command
Configure BUSY status time of LLC2 llc2 timer busy mseconds
Restore the default value of BUSY status time of LLC2 undo llc2 timer busy
Operation Command
Configure P/F wait time of LLC2 llc2 timer poll mseconds
Restore the default value of P/F wait time of LLC2 undo llc2 timer poll