Filter
Top Products
Configure IPX 381
d Activate IPX module on interface Serial0, the network ID being 1000.
Configuring BDR parameter
[Router] interface serial 0
[Router-Serial0] dialer enable-legacy
[Router-Serial0] dialer-group 1
[Router-Serial0] ipx network 1000
e Configure an address map to Router B
[Router-Serial0] dialer route ipx 1000.0.0c91.f61f 8810124
[Router-Serial0] quit
f Configure a static route to network ID 3
[Router] ipx route 3 1000.0.0c91.f61f tick 10 hop 2
g Configure a static route to network ID 9300
[Router] ipx route 9300 1000.0.0c91.f61f tick 10 hop 2
h Configure an information about Server2 file service
[Router] ipx service 4 server2 9300.0000.0000.0001 451 hop 2
i Configure an information about Server2 directory service
[Router] ipx service 26B tree 9300.0000.0000.0001 5 hop 2
j Configure dialing rules
[Router] dialer-rule 1 ipx permit
2 Configure Router B:
a Activate IPX module
[Router] ipx enable
b Activate IPX function on interface Ethernet0, the network ID being 3
[Router] interface ethernet 0
[Router-Ethernet0] ipx network 3
c Set encapsulation format of packets on Ethernet interface to Ethernet_SNAP
[Router-Ethernet0] ipx encapsulation snap
[Router-Ethernet0] quit
d Activate IPX module on interface Serial0, the network ID being 1000.
Configuring BDR parameter
[Router] interface serial 0
[Router-Serial0] dialer-group 1
[Router-Serial0] ipx network 1000
e Configure an address map to Router A:
[Router-Serial0] dialer route ipx 1000.00e0.fc01.0000 8810122
[Router-Serial0] quit
f Configure a static route to network ID 2
[Router] ipx route 2 1000.00e0.fc01.0000 tick 10 hop 2
g Configure a static route to network ID 9300
[Router] ipx route 937f 1000.00e0.fc01.0000 tick 10 hop 2
h Configure an information about Server1 file service
[Router] ipx service 4 server1 937f.0000.0000.0001 451 hop 2