Filter
Top Products
312 CHAPTER 19: CONFIGURING BRIDGE
Bridge-Template
interface
I. Networking Requirements
Configure a router so that routing can be carried out on each interface in the
bridge-set.
II. Networking Diagram
Figure 114 Networking of bridge-template interface
III. Configuration Procedure
[Router]bridge enable
[Router]bridge routing-enable
[Router]bridge 1 stp ieee
[Router]interface ethernet1
[Router-Ethernet1]bridge-set 1
[Router-Ethernet1]interface ethernet2
[Router-Ethernet2]bridge-set 1
[Router-Ethernet2]interface bridge-template 1
[Router-Bridge-Template1]ip address 1.1.1.1 255.255.0.0
[Router-Bridge-Template1]interface ethernet0
[Router-Ethernet0]ip address 2.1.1.1 255.255.0.0
E0
E1
E2
Bridge Set 1
Bridge-Template
interface 1.1.1.1
2.1.1.1
Router