Filter
Top Products
576 CHAPTER 40: CONFIGURING IPSEC
Table 653 Display and Debug IPSec
Displaying and
Debugging the NDEC
Car
d
Resetting the crypto card
When the crypto card operates abnormally, resetting the crypto card can be used
to restore the crypto card to normality. When resetting the crypto card, the crypto
card restores its initialization. At the same time, the host retransmits the card's
configured information and SA information being used to the crypto card. In
addition, the host automatically resets the crypto card when it finds that the
crypto card operates abnormally.
Configure the following in the system view:
Table 654 Reset crypto card
Operation Command
Display all created SA (applicable to IPSec
software)
display ipsec sa all
Display all SA information briefly
(applicable to IPSec software)
display ipsec sa brief
Display the specific SA information
(applicable to IPSec software)
display ipsec sa parameters
dest-address protocol spi
Display global SA lifetime (applicable to
IPSec software)
display ipsec sa duration
Display SA established with specific peer
ends (applicable to IPSec software)
display ipsec sa remote ip-address
Display all security policy base information
(applicable to IPSec software)
display ipsec sa policy policy-name [
sequence-number ]
Display statistic information related to
security message (applicable to IPSec
software)
display ipsec statistics
Display configured IPSec proposal
(applicable to IPSec software)
display ipsec proposal [
proposal-name ]
Display all security policy base information
(applicable to IPSec software)
display ipsec policy all
Display brief security policy base
information (applicable to IPSec software)
display ipsec policy brief
Display all security policy base information
by name (applicable to IPSec software)
display ipsec policy name policy-name
[ sequence-number ]
Clear all SA (applicable to IPSec software) reset ipsec sa all
Clear specific SA information (applicable
to IPSec software)
reset ipsec sa parameters
dest-address protocol spi
Clear SA of the specified security policy
base (applicable to IPSec software)
reset ipsec sa policy policy-name [
sequence-number ]
Clear SA established with specified peer
ends (applicable to IPSec software)
reset ipsec sa remote ip-address
Clear statistic information related to
security messages (applicable to IPSec
software)
reset ipsec statistics
information debugging related to IPSec
(applicable to IPSec software)
debugging ipsec { sa | packet | misc }
Operation Command
Reset crypto card (applicable to crypto
card)
encrypt-card reset [ slot-id ]