Filter
Top Products
Upgrade Boot ROM Software 33
5 Example: if you select baud rate 115200 bps, the system will prompt you to
modify the baud rate and select XMODEM transfer protocol:
Download speed is 115200 bps. Change the terminal's speed to 115200
bps, and select XMODEM protocol. Press ENTER key when ready.
According to the above prompt, change the baud rate setting at the terminal to
the number equal to the baud rate of the software selected to download. After
having set the baud rate of the terminal, disconnect and then reconnect the
terminal, then press Enter to begin downloading.
After having set the terminal baud rate, make sure to disconnect and then
reconnect the terminal emulator. Otherwise, the new baud rate will not be
effective.
6 The router outputs the following information to indicate waiting for download:
Now Downloading Program File.
Please Start Transfer Program File Use Xmodem Protocol.
If You Want To Exit Press <Ctrl+X>.
Downloading...CCCCCCCCCC
Select Transfer/Send File from the terminal emulator menu to select the file to be
downloaded, the following dialog box displays:
Figure 15 “Send file” dialog box
7 Click Browse and select software to be downloaded. Change the downloading
protocol to XMODEM, then click Send. The following message window displays: