Filter
Top Products
Displaying and Debugging RIP 421
Configure filtering the routing information being advertised
Table 484 Filter the Routing Information Being Advertised by RIP
By default, RIP does not filter any route information received or being advertised.
The protocol attribute specifies the routing domain that can be filtered. At
present, RIP can filter routes domain such as Connected, Static, OSPF, OSPF-ASE
and BGP. See “Configure Route Filter” of “Configuration of IP Routing Policy” for
details.
Resetting RIP This command restores the router to the default RIP configuration.
Perform the following configuration in RIP view.
Table 485 Reset RIP
Displaying and
Debugging RIP
Table 486 Display and Debug RIP
Change or cancel filtering the routing
information received from a specified
gateway
undo filter-policy gateway
prefix-list-name import
Filter the routing information received filter-policy {acl-number | ip-prefix
prefix-list-name } import
Change or cancel filtering routing
information received
undo filter-policy {acl-number |
ip-prefix prefix-list-name } import
Filter routing information received from a
specified gateway and the routing
information received according to
prefix-list
filter-policy ip-prefix
prefix-list-name gateway
prefix-list-name import
Change or cancel filtering the routing
information received from a specified
gateway and the routing information
received according to prefix-list
undo filter-policy ip-prifix
prefix-list-name gateway
prefix-list-name import
Operation Command
Filter the routing information being
advertised.
filter-policy { acl-number |
ip-prefix prefix-list-name } export [
protocol ]
Change or cancel filtering the routing
information being advertised
undo filter-policy { acl-number |
ip-prefix prefix-list-name } export [
protocol ]
Operation Command
Operation Command
Reset RIP reset
Operation Command
Display current RIP running status and
global configuration information.
display rip
Turn on RIP debugging information debugging rip { packets | receive |
send }