Filter
Top Products
Establish Configuration Environment 17
Figure 8 Establish a dial-up connection via “HyperTerminal”
Figure 9 Dial on remote computer
4 If a dial-up connection is established, then press Enter after the self-test to display
the prompt “Username:” and “password:”. Enter the correct username and the
password, then enter the system view of Router.
5 Enter command to configure the router or view running status of the router. Enter
? to get help when necessary. For details of specific commands, please refer to the
following chapters.
Local/Remote Telnet
Connection
Configuration
Environment
After the router powers on, and IP addresses of the interfaces have been properly
configured on the router, you can use the Telnet client program to establish a
connection with the router and log in the router via LAN or WAN. Then configure
the router.
1 As shown in the following two figures, connect the Ethernet port adapter on the
computer with the Ethernet interface of the router. To establish a remote