Filter
Top Products
DCC Configuration Examples 743
[Router-Serial0] ip address ppp-negotiate
[Router-Serial0] dialer enable-circular
[Router-Serial0] dialer-group 1
[Router-Serial0] dialer route ip 100.1.1.254 8810048
[Router-Serial0] dialer route ip 100.1.1.254 8810049
……
[Router-Serial0] dialer route ip 100.1.1.254 8810055
[Router-Serial0] link-protocol ppp
[Router-Serial0] ppp pap local-user user1 password simple user1
2 Configure RouterB:
[Router] dialer-rule 2 ip permit
[Router] aaa-enable
[Router] aaa authentication-scheme local-first
[Router] aaa accounting-scheme optional
[Router] local-user user1 password simple pass1
[Router] local-user user2 password simple pass2
……
[Router] local-user user16 password simple pass16
[Router] ip pool 1 100.1.1.1 100.1.1.16
[Router] interface dialer 0
[Router-Dialer0] ip address 100.1.1.254 255.255.255.0
[Router-Dialer0] remote address pool 1
[Router-Dialer0] dialer enable-circular
[Router-Dialer0] dialer-group 2
[Router-Dialer0] link-protocol ppp
[Router-Dialer0] ppp authentication-mode pap
[Router-Dialer0] ppp pap local-user userc password simple passc
[Router-Dialer0] interface async 1
[Router-Async1] dialer circular-group 0
[Router-Async1] link-protocol ppp
[Router-Async1] ppp authentication-mode pap
[Router-Async1] interface async 2
[Router-Async2] dialer circular-group 0
……
[Router-Async7] interface async 8
[Router-Async8] dialer circular-group 0
[Router-Async8] link-protocol ppp
[Router-Async8] ppp authentication-mode pap
3 Configure subscriber PC:
a Install a modem in a subscriber PC, configure it to be in “autoanswer mode”,
open [Start/Programs/Accessories/Communications/Dialup network], click [Set
up new connection] in the [Dialup network] window, and select [Server type] in
the established new connection, and perform the following operations:
■ Select the option [PPP]
■ Set the option [Login network] as unchecked
■ Set the option [Start software compression] as unchecked
b Select [TCP/IP setting] in the [Server type] page, and perform the following
operations:
■ Check the option [Server allocated with IP address]
■ Set the [Use IP head pointer compression] option as unchecked
■ Set the [Use default gateway of the remote network] option as unchecked