Filter
Top Products
Configuring BGP 459
By default, the route from the peer or peer group is not designated with any route
policy.
10 Create a filtering policy based on the access list for the peer group
Table 537 Create a Filtering Policy Based on Access List for Peer Group
By default, no route filtering policy based on IP ACL for peer group is set.
11 Create a BGP route filtering based on the AS path for the peer group
Table 538 Create a BGP Route Filtering Based on AS Path for Peer Group
By default, a BGP filtering is disabled.
12 Configure the BGP version of peer group
Table 539 Configure BGP Version of Peer Group
By default, software accepts BGP Version 4.
Creating Aggregate
Addresses
CIDR supports manual route aggregation. Manual aggregation, using the
aggregate command adds a piece of routing aggregate information to the BGP
routing table. The parameters can be set at the same time when manual
aggregation mode is configured.
Perform the following configurations in BGP view.
Table 540 Create an Aggregate Addresses
Create routing policy for peer group peer group-name route-policy
policy-name { import | export }
Remove a routing policy to import or
export routes
undo peer group-name route-policy
policy-name { import | export }
Operation Command
Create an filtering policy based on access
list for peer group
peer group-name filter-policy
acl-number { import | export }
Delete an filtering policy based on access
list for peer group
undo peer group-name filter-policy
acl-number { import | export }
Operation Command
Create a BGP route filtering based on AS
path for peer group
peer group-name acl
aspath-list-number { import | export
}
Delete a BGP route filtering based on AS
path for peer group
undo peer group-name acl
aspath-list-number { import | export
}
Operation Command
Configure the BGP version of peer group peer group-name version
version-number
Restore the default BGP version for the
peer group
undo peer group-name version
Operation Command