Filter
Top Products
Configuring Congestion Management 691
Applying the custom-list queuing group to the interface
To put the custom-list queue into operation, the configured custom-list queue
must be applied to the specific interface. Every interface can only use one custom
queue, but one custom queue can be applied to multiple interfaces. Multiple
different custom queues may be established to apply to different interfaces.
Perform the following configurations in the interface view.
Table 732 Apply Custom-List Queuing to the Interface
By default, the interface uses the FIFO queue.
Configuring the queue length of the custom-list queuing
The queue length of each priority queue (the maximum number of the data
packets that can be accommodated) can be specified.
Perform the following configurations in the system view.
Table 733 Configure the Queue Length of the Custom-List Queuing
By default, the length of the custom-list queue is 20, and the range of the value is
1 to 1024.
Configuring the number of the continuously transmitted bytes of the
custom queue
The number of bytes of the continuously transmitted packets (the total number of
the accommodated bytes) may be specified for each custom queue.
Perform the following configurations in the system view.
Table 734 Configure the Number of the Continuously Transmitted Bytes of the Custom
Queuing
By default, the number of bytes transmitted by respective queues in every polling
is 1500, and the range of the value is 1 to 16777215.
Operation Command
Apply the custom-list queuing group on
the interface
qos cq cql cql-index
Cancel the application of the custom-list
queuing group on the interface
undo qos cq
Operation Command
Configure the queue length of the
custom-list queuing
qos cql cql-index queue queue-number
queue-length queue-length
Recover the default value of the
custom-list queue length
undo qos cql cql-index queue
queue-number queue-length
Operation Command
Configure the number of the continuously
transmitted bytes of the custom queuing
qos cql cql-index queue queue-number
serving byte-count
Recover the default value of the
continuously transmitted bytes of the
custom queuing
undo qos cql cql-index queue
queue-number serving