Filter
Top Products
496 CHAPTER 32: CONFIGURING IP POLICY ROUTING
[RouterA]debugging ip policy-routing
IP: s=151.1.1.1(local),d=152.1.1.1, len 64, policy match
IP: route map lab1, item 10, permit
IP: s=151.1.1.1(local),d=152.1.1.1, len 64, policy routed
IP: local to serial 150.1.1.2
On Router A, change the message size to 101 bytes and monitor policy routing
with debug ip policy command. Note: the messages of 101 bytes match the entry
item whose serial number 20 as shown in the routing diagram lab1. They are sent
to 151.1.1.2.
[RouterA]debugging ip policy-routing
IP: s=151.1.1.1(local),d=152.1.1.1, len 101, policy match
IP: route map lab1, item 20, permit
IP: s=151.1.1.1(local),d=152.1.1.1, len 101, 64, policy routed
IP: local to serial 151.1.1.2
On Router A, change the message size to 1001 bytes and monitor policy routing
with debug ip policy command. Note that this message does not match any entry
item in lab1, so it is forwarded in regular mode.
[RouterA]debugging ip policy-routing
IP:s=151.1.1.1(local),d=152.1.1.1, len 1001, policy rejected-normal forwarding
IP:s=151.1.1.1(local),d=152.1.1.1, len 1001, policy rejected-normal forwarding