Filter
Top Products
Configuring a Modem 753
Perform the following configuration in interface (asynchronous serial, AUX or AM
interface) view.
Table 781 Specify the Events Triggering the Modem Scripts
The argument following the script init-string command is the initialization
string rather than the modem script name.
Configure the Modem
Answer Mod
e
This configuration depends on whether the external modem to which the
asynchronous interface is connected is in auto-answer mode (whether the AA LED
on the modem is on). If the modem is in auto-answer mode, the user should
execute
modem-autoanswer before using the dial function. If not, the user should
execute
undo modem-autoanswer. Inconsistency of the configuration and the
modem status may cause the abnormal acceptance of some modem incoming
calls.
Perform the following configuration in interface (asynchronous serial, AUX or AM
interface) view.
Table 782 Configure the Answer Mode for the Modem
By default, the modem works in non-auto answer mode.
Configure
Authentication for a
Modem Dial-in User
The command modem-login is configured to authenticate the name and password
of the dial-in user. Generally this command is used together with the command of
script trigger connect, thus many usernames can login at the same interface.
Perform the following configuration in interface (asynchronous serial, AUX or AM
interface) view.
Operation Command
Specify the automatically executed modem
script when the calling-out connection is set
up successfully.
script trigger login script-name
Specify the automatically executed modem
script when the calling-in connection is set up
successfully.
script trigger connect script-name
Specify the automatically executed modem
script before DCC dialing.
script trigger dial script-name
Specify the automatically executed modem
script at the time of line reset.
script trigger logout script-name
Specify the automatically executed modem
script at the time of system power-on and
restart.
script trigger init script-name
Specify the default modem initialization string
for initializing modem.
script init-string init-string
Operation Command
Configure the modem to work in
auto-answer mode
modem auto-answer
Configure the modem to work in
non-auto answer mode
undo modem auto-answer