3Com 10014299 Network Router User Manual


 
34 CHAPTER 3: SYSTEM MANAGEMENT
Figure 16 “Send file” message window
8 After downloading, the router will save the file into Flash or NVRAM, display the
following information, and prompt restoring of the baud-rate setting of the
terminal emulator.
Download completed.
Writing to flash memory...
Please waiting, it needs a long time ##############
Write Bootrom Success.
Please return to 9600 bps. Press ENTER key to reboot the system.
The above information indicates that the information is downloaded. Boldface
characters prompt the user to restore the baud rate setting of the terminal
emulator. Click [Disconnect] in the terminal menu, and then click [Connect] once
again. If the download fails, the system displays the following information, and
reboot the router:
Download failed.
3Com Router start booting
……
If this message is displayed, you should find out the cause prior to upgrading.
9 Restore baud rate of the terminal emulator. Press Enter and the Boot ROM
software of the router will be directly decompressed and loaded into the memory
for execution.
Upgrade the 3Com
Router Main Program
Software
This section contains information to assist you with upgrading the 3Com Router
Main Program software.
CAUTION: You are recommended to upgrade the software only when necessary
and under the guidance of technical support personnel. The router software
package includes the Boot ROM software and the 3Com Router main program
software. When upgrading the software, remember to match the version of the
Boot ROM software with that of the main software.