Access Navigator - Release 1.8 August 2003 6-61
Electrical Installation
Replace Front Cover
Replace Front Cover
DANGER! FIRE HAZARD. STANDARDS UL 1950 AND C22.2 NO. 950.95 REQUIRE
THAT ALL ACCESS COVERS BE REPLACED TO PREVENT FIRES FROM SPREADING TO
NEARBY EQUIPMENT.
Replace front cover and tighten screws.
Configure Management Interfaces
This procedure provides steps for setting up the RS-232 and Ethernet interface configurations for remote
management by CLI, Telnet, SNMP, Valet™ and NetworkValet™ EMS software
Setup Summary
n Start RS-232 Management Session ... 6-62
n Set Date ... 6-63
n Set Time ... 6-63
n Set System ID or CLLI code ... 6-64
n Set IP Address and Subnet Mask ... 6-64
n Set Gateway Address ... 6-65
n Verify Ethernet Management Connection ... 6-43
n Exit Management Session ... 6-65