Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 18-155
CLI Language Reference
CLI Command List
Show Users
Purpose: Shows current user settings and status.
NOTE: Normally a user logs in once to start a management session, then
logs off when done (exit command). The system allows the same user name
to be “logged in” more than once. The total number of simultaneous sessions
by all users can not exceed 3, comprising a maximum of 1 RS-232 session and
2 Telnet sessions.
Security: Level 3 (monitor)
Syntax: show users
The following is a typical message showing four users. Alice and Bill have level 1
(manager) access. Carl Smith has level 2 (operator) access. And Dave46 has level 3
(monitor) access. The message also gives the current login status and the time and date
that each user last logged into the system.
Message:
User Level Logged in Last Login
---- ----- --------- ----------
alice 1 1 09:28:37 11/23/1998
bill 1 2 14:06:25 11/17/1998
carlsmith 2 0 11:17:45 11/22/1998
dave46 3 0 12:14:33 11/20/1998
Description:
Item Description
User User names of people with access to the system.
Level User access level: manager (1), operator (2), monitor (3).
Logged in Number of active management sessions, 0 to 3.
Last Login Time and date that user last logged into the system.