Filter
Top Products
18-152 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
NOTE: An Access Navigator DS1 may connect to either T1 port of the
Access Bank II. The following message example shows that the Access
Navigator DS1 is connected to T1#2 of the Access Bank II, so that T1#1
becomes the T1Drop port. No DS0 channels are currently connected to T1#1.
NOTE: In the Access Bank II/SDSL, the SDSL port replaces T1#2.
Each row and column represents one end of the connection (row is span, column is
channel). Note that some spans have two rows of channels, with channels 1 to 12 in the
first row and channels 13 to 24 in the second row.
The table entry at the row-column intersection represents the other end of the
connection (span:channel). Each interface name in the first column has a span number
shown in parentheses. For example, FX#2 (4) means the FX#2 is span number 4, so the
entry “4:2” means span 4 channel 2. Table entries with the letters “n/c” have “no
connection.”
In the message example below, row T1#2 (2) and column CH 13 represent span 2
channel 13. The corresponding table entry is “4:1”, which represents span 4 channel 1.
Therefore, T1#2 channel 13 connects to FX#2 channel 1. Similarly, the entry for row
FX#2 and column CH 1 is “2:13”, which indicates a connection to T1#2 channel 13.
Message:
Static Connections:
CH 1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
Span
---- ----------------------------------------------------------------------
T1#1(1) n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c
n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c
T1#2(2) 3:1 3:2 3:3 3:4 3:5 3:6 3:7 3:8 3:9 3:10 3:11 3:12
4:1 4:2 4:3 4:4 4:5 4:6 4:7 4:8 4:9 4:10 4:11 4:12
FX#1(3) 2:1 2:2 2:3 2:4 2:5 2:6 2:7 2:8 2:9 2:10 2:11 2:12
FX#2(4) 2:13 2:14 2:15 2:16 2:17 2:18 2:19 2:20 2:21 2:22 2:23 2:24
V35(5) n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c
n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c
RS232(6) n/c
Note: #:# = span:channel
n/c = no connection