Carrier Access Access Navigator Network Router User Manual


 
Access Navigator - Release 1.8 August 2003 18-145
CLI Language Reference
CLI Command List
Show EOC
Purpose: Displays the current primary and secondary TMC locations.
Security: Level 3 (monitor)
Syntax: show eoc
Message:
EOC Settings:
Primary: DS1 #25 channel 12
Secondary: DS1 #29 channel 12
Description:
Show Ethernet
Purpose: Displays the Ethernet media access control (MAC) address, as well as the Ethernet IP
address and mask. which is the physical network address of the Ethernet port. The
MAC address is the physical network address of the Ethernet port. It is fixed by
hardware and can not be changed.
Security: Level 3 (monitor)
Syntax: show ethernet
Message:
IP Address and Mask: 192.168.118.65 255.255.255.0
MAC Address: 00-E0-97-00-08-37
Description:
Item Description
Primary Primary EOC. The default is DS1 #25, DS0 #12.
Secondary Secondary EOC. The default is DS1 #29, DS0 #12.
Item Description
IP Address Each Access Navigator on the same Ethernet network must have
a unique static Internet Protocol (IP) address. IP addresses have
the format xxx.xxx.xxx.xxx, where each xxx is a decimal
number between 0 and 255. For example, 192.168.0.123 is a
valid IP address. Note that the address contains only three
periods, one between each of the four numbers. If the Ethernet
interface is not used, type none for the IP address.